Cixi Anshi Communication Equipment Co.,Ltd
High Speed, High Quality, Best Service
Add to Cart
| Description | Splice bundle dia. Max. A | Single cable dia. Min. B | Sheath opening length L | Applicable cable pairs | |
| Wire diameter 0.4mm | Wire diameter 0.5~0.9mm | ||||
| XAGA550 43/8-200 | 43 | 8 | 200 | 10—30 | 10—20 |
| XAGA550 43/8-350 | 300 | 30—50 | 20—35 | ||
| XAGA550 43/8-500 | 500 | 50—100 | 20—50 | ||
| XAGA550 75/15-200 | 75 | 15 | 200 | 200—300 | 50—200 |
| XAGA550 75/15-500 | 500 | ||||
| XAGA550 92/25-300 | 92 | 25 | 300 | 400—600 | 200—500 |
| XAGA550 92/25-500 | 500 | ||||
| XAGA550 92/25-650 | 650 | ||||
| XAGA550 122/30-300 | 122 | 30 | 300 | 600—1000 | 600—1000 |
| XAGA550 122/30-650 | 650 | ||||
| XAGA550 160/42-500 | 160 | 42 | 500 | 1200—1600 | 1200—1600 |
| XAGA550 160/42-720 | 720 | ||||
| XAGA550 200/50-500 | 200 | 50 | 500 | 1800—3600 | 1600—2400 |
| XAGA550 200/50-720 | 720 | ||||
| Remarks: provide customized service | |||||
GENERAL DESCRIPTION:
RSBJ Heat shrink cable jointing kits for telecom cables are fiber reinforced heat shrink closures designed for the protection of cable joints for the non-pressurized telecom cables network. The heat shrink cable joint mainly consists of a heat shrink, reinforced and wraparound sleeve and a wrap-around metal canister/cardboard liner. The heat shrink sleeve is made of a fiber reinforced high strength composite material with integrated layer of aluminum serving as a moisture barrier. The heat shrink sleeve is internally coated with a flexible heat adhesive which will melt and adhere to the cable to form an air and water tight seal. The wrap-around metal canister/cardboard liner protects the cable joints from moisture vapor transmission. The white line inside of the trajectory and the temperature-sensitive paint on the heat shrink sleeve can lead a good and right operation. The heat shrink cable jointing kits can be used on polyethylene, lead, steel and aluminum jacketed cables for straight cable joints and branch cable joints up to three telecom cables out on each side.
FEATURES:
1. High performance heat shrink cable jointing kits for non-pressurized application;
2. Composite material of the heat shrink sleeve provides high mechanical strength;
3. Heat shrink cable jointing kits have high tightness under high & low temperature.
4. Full Range heat shrink cable jointing kits to suit all cable sizes;
5. Suitable for use with all connector systems;
6. Easy installation
APPLICATION:
1. RSBJ heat shrink cable jointing kits are suitable for non-pressurized and up to 40kPa pressurized telecom cables with metal or polyethylene sheaths including jelly filled cables.
2. RSBJ heat shrink cable jointing kits are suitable for aerial, buried and ducted application.
3. RSBJ heat shrink cable jointing kits are applicable both for straight as well as branch joints up to 3 cables out at each side.
RSBJ HEAT SHRINK CABLE JOINTING KIT NORMAL CONTENTS
1. Heat shrink Closure / Heat shrink Sleeve
2. Flexible Channel
3. Channel Over/Under Clip
4. Cardboard Liner/Metal Canister
5. Shield Continuity Kit
6. Cleaning Tissues
7. Adhesive Backed Aluminum Strip (For caniser/Liner)
8. Adhesive Backed Aluminum Tape/Aluminum Foil for Cable Protection) /
9. Abrasion Strip
10. Measuring Aid / Bond Gauge
11. PVC Tape
12. Desiccant / Silica Gel
13. Installation Instruction
BRANCH OFF KIT FOR BRANCH CABLE JOINT CONTENTS
1. Branch-off clip
2. Shield Continuity Branch Assembly With Shield Continuity Clip
3. Connector for continuity wire branching
4. Adhesive Backed Aluminum Cable Tape / Aluminum Foil
5. Cleaning Tissue
6. Abrasive Strip
7. Tie Wrap
