RACK MOUNT PATCH PANEL 24 PORT RACK MOUNT PATCH PANEL 19 INCH CAT6 UTP
19 inch 1U RJ45 CAT6 Unshield UTP 110 IDC Rack Mount Patch Panel with Cable Manager
Other Specs:
1) CAT5E/CAT6/CAT6A
2) 1U 24 Port or 2U 48 Port
3) UTP or FTP/STP
4) 110 IDC / KRONE IDC / Dual IDC (Both for 110 +Krone IDC)
Standard Requirements
- Meets ANSI/TIA/EIA-568-B.2 Category 6 requirements
- Meets TIA/EIATSB-40
- Meets ISO/IEC Generic Cabling Standard 11801:2002 ed.2.0
- Meets CENELEC Generic Cabling Standard EN50173-1:2002
Material Specifications
- Housing: 0.06" (1.6mm) thickness steel
- Cover: 0.039" (1mm) thickness steel
- PCB (Printed Circuit Board): FR-4 0.06" (1.6mm) thickness, 2 layers
- Contacts: 0.018" (0.45mm) Phosphor bronze with 50 micro inches (1.27 micron) gold plating on contact area
- IDC: PC UL94V-0
Electrical Characteristics
| Standard |
According to UL1863 |
| Current Rating |
1.5A Max |
| Voltage Rating |
150V |
| Contact Resistance |
20m-ohm |
| Insulation Resistance |
500M-ohm |
| Dielectric Withstand Voltage |
1000V AC RMS, 60Hz/min |
